Why You Should Use a PVDF Ball Valve in Your PVDF Pipe System
A PVDF pipe system can be an incredibly useful addition to your manufacturing or research facility, and they can come in handy in other facilities as well. However, you will want to be sure that you are using the right components, and one of the most important pieces of equipment you’ll need will be a pvdf ball valve. A pvdf ball valve can allow you to restrict access to your facility. They also maintaining optimal temperatures, preventing contamination and improving your efficiency as well. Here are three ways that adding this particular piece of equipment can benefit your facility or operation.
What is PVDF?
If you’re not familiar with polyvinylidene fluoride (PVDF), that’s okay—most people haven’t heard of it. However, if you have any reason to be in contact with fuel products or need to contain hydraulic fluids and gases, you should know about it. Unlike rubber and other elastomers, PVDF is resistant to chemicals like acids and fuels that can quickly degrade elastomeric seals. Also referred to as Kynar, PVDF is an easy-to-maintain material that offers superior temperature resistance and chemical resistance when compared to other materials such as PTFE or Viton.
3 Benefits of Using PVDF Ball Valves
Let’s face it. There are plenty of plastic valves out there, so why should you use PVDF ball valves? If you are using pressurized piping systems, regardless of whether it is a part of an industrial system or even used on your home’s plumbing system, you need to look at several things when deciding which valves to use. When selecting what kind of valve to install, consider these three benefits that come with choosing PVDF ball valves for your pipeline: 1) They are inexpensive. 2) They are durable and extremely long-lasting. 3) They provide greater safety than other valves.
Advantages of PVDF Ball Valves Over Other Valves
Metal ball valves used to be more common, but they have been phased out of many uses due to their vulnerability to corrosion and temperature. They can also require high operating pressures and they aren’t as easy to clean and maintain. Today, more companies are using PVDF ball valves in place of traditional metal valves. There are several reasons why these valves are better for use with your pipes: 1) Lower operating pressure; 2) Easy maintenance; 3) Safe materials; 4) Quick installation process. All you need is a wrench or two, some PVC cement and a pair of safety goggles! With few exceptions, if you’re working with PVC pipe then it makes sense to use a PVDF ball valve instead of other types.
How to Choose a Good Quality PVDF Ball Valve
When you’re choosing a ball valve for your PVDF piping system, there are several different components you should take into consideration. The most important of these is to make sure you choose one made from high-quality PVDF plastic. It’s also important to make sure that you choose a fitting that can withstand temperatures above 250 degrees Fahrenheit as well as below 32 degrees Fahrenheit. It’s also important to pay attention to your flow rate, since many PVDF valves will be unable to handle higher flows.
What are the Different Types of PVDF Ball Valves?
PVDF ball valves are a special type of valve that is used to completely seal off one pipe from another. When you’re working with pvdf plastic, you need to make sure that your system can handle complete cuts. Because pvdf fittings, like all plastics, will melt and burn when they come into contact with fire or other high temperatures. The material is also resistant to many chemicals as well. Which makes it extremely useful for situations where there might be an environmental hazard in your plant. Since pvdf fittings tend to be made out of flexible rubber or silicone. However, these valves aren’t necessarily designed for heavy industrial environments.
3 Ways to Save Money When Shopping for PVDF Ball Valves
PVDF plastic ball valves are available for purchase online at wholesale prices. By shopping for your ball valves on bulk online, you can save big. The most important factors that will determine how much you pay include demand and supply. How many companies sell these valves, and whether or not you buy them through the season when they’re on sale. Because manufacturers produce large batches of ball valves at once. It’s important to always check out reviews and compare prices before making your first order. Price reductions typically depend on quantities ordered. But expect to see cost reductions of up to 50% or more if you order enough products at once.
Conclusion
In any piping system, it’s important to use only materials that can withstand high temperatures and pressure. When you’re dealing with an industrial-grade piping system, having valves made from these materials is essential. That’s why you should always use PVDF ball valves when dealing with a PVC pipe system. The material will withstand much higher temperatures than other valves on the market. So they won’t need to be replaced as often. They also provide much more control over your system. It all comes down to having reliable products that are built for their purpose. That’s what you get when you choose PVDF for your systems.
